About the Everpure Insurice Triple-i4000² System
The Everpure Insurice Triple-i4000² is Everpure's system for higher volume, higher flow, higher capacity ice machines. Three i4000² cartridges share one manifold, giving a rated capacity of 36,000 US gallons (136,247 litres) at up to 5 gallons a minute (18.9 litres a minute).
It also has a self-contained scale inhibitor feed, which Everpure says keeps ice machines functioning at full capacity. We supply, fit and service it. For smaller machines, see the Single-i2000², the Twin-i2000² and the Twin PF-i2000², or the whole Everpure range.
At a glance
- What it is
- A three-cartridge system for high-volume ice machines
- Filtration
- Down to 0.2 micron, by mechanical means
- Rated capacity
- 36,000 US gal (136,247 L)
- Service flow
- Up to 5 gpm (18.9 L/min)
- Scale control
- Self-contained scale inhibitor feed, as tested by Pentair
- Connections
- 3/4 in MNPT inlet, 3/4 in FNPT outlet
- Manifold
- Water shut-off, flushing valve and outlet pressure gauge
- Certified
- NSF/ANSI 42 and 53, including cyst reduction
- From us
- Supply, installation and scheduled cartridge changes

What it does.
- Three i4000² cartridges on one manifold for higher volume, higher flow, higher capacity ice machines
- Self-contained scale inhibitor feed keeps ice machines functioning at full capacity, as tested by Pentair
- Micro-filters dirt and particles as small as 0.2 micron by mechanical means
- Micro-Pure II media inhibits the growth of bacteria on the filter media
- Reduces particulates, chloramines, and chlorine taste and odours that can affect beverages
- Manifold has a water shut-off, a flushing valve and an outlet pressure gauge
- Certified to NSF/ANSI Standards 42 and 53, including cyst reduction
Typical applications
Who the Everpure Insurice Triple-i4000² is for
- Hotels and banqueting kitchens whose ice machines run hard through service peaks.
- Large restaurants, bars and central kitchens with high-volume or several ice machines on one supply.
- Sites that need up to 5 gpm and 36,000 gallons of capacity in one system.
- Operators who want a scale inhibitor feed built into the system, not added on.
- Maintenance teams who want a gauge, a shut-off and a flushing valve on the manifold.
How the Everpure Insurice Triple-i4000² System works
Water enters the manifold and passes through three i4000² cartridges. They use Everpure's Micro-Pure II media, which reduces chlorine taste and odour and, Everpure says, inhibits the growth of bacteria on the media. The precoat filtration micro-filters dirt and particles as small as 0.2 micron by mechanical means. Everpure says an ISO 17025 accredited lab validated a 99.999% reduction of Pseudomonas diminuta, following ASTM F838-05.
A self-contained scale inhibitor feed helps keep the ice machine at full capacity. Everpure says the system also reduces scale and clogging in distribution lines, the evaporator plate and the pump, and reduces particulates, chloramines and chlorine taste and odours. Scale claims are marked on the sheet as tested by Pentair.
NSF International certifies the system to NSF/ANSI Standards 42 and 53, including cyst reduction (Cryptosporidium and Giardia) by mechanical means. Everpure notes the system must not be used on water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after it.
Which one should you choose?
The Triple is Everpure's biggest Insurice system on this list. Choose by the machine's volume and flow, and we size it at survey.
Triple-i4000²
You run higher volume, higher flow ice machines and need up to 5 gpm and 36,000 gallons, with a scale inhibitor feed.
Twin PF-i2000²
Your machine is rated up to 1,450 lb a day (cubes) or 2,200 lb a day (flakes) and you want a prefilter.
Twin-i2000²
The same machine sizes with cleaner incoming water, and no prefilter.
Single-i2000²
You have one smaller machine: cubers up to 750 lb a day, flakers up to 1,500 lb a day.
Installation and servicing
Everpure's installation tips: choose a mounting location that supports the full weight of the system when it is operating. Never use a saddle valve. Use a 3/4 inch water line. Do not connect the system to a water-cooled condenser. Install it vertically with the cartridges hanging down and 2.5 inches (6.35 cm) of clearance below them. Flush the cartridges by running water through the system for five minutes at full flow.
The system is 29.26 inches high, 21 inches wide and 5.5 inches deep (74.3 × 53.3 × 13.9 cm), and weighs 28 lb (12.7 kg) in operation. The inlet is 3/4 inch MNPT and the outlet is 3/4 inch FNPT. Those are NPT thread sizes, so we confirm the fittings for your pipework at survey. No electrical connection is needed.
Everpure's operation tips: change the cartridges on a regular six-month preventative maintenance programme, or when capacity is reached or pressure falls below 10 psi (0.7 bar). Keep service flow under 5 gpm. We set the schedule at survey and change the cartridges under a maintenance plan. The survey is chargeable and is credited back if you go ahead.

Everpure Insurice Triple-i4000² System questions answered
What is the Everpure Insurice Triple-i4000²?
A three-cartridge water filter system for higher volume, higher flow, higher capacity ice machines.
What is its capacity and flow?
36,000 US gallons (136,247 litres) of rated capacity, at a maximum service flow of 5 gallons a minute (18.9 litres a minute).
How fine is the filtration?
Everpure says the cartridges micro-filter dirt and particles as small as 0.2 micron by mechanical means.
Does it control scale?
It has a self-contained scale inhibitor feed. Everpure says it keeps ice machines functioning at full capacity and reduces scale and clogging in lines, the evaporator plate and the pump. Scale claims are as tested by Pentair.
Is it certified?
Yes. NSF International certifies it to NSF/ANSI Standards 42 and 53, including cyst reduction by mechanical means.
How big is it?
29.26 inches high, 21 inches wide and 5.5 inches deep (74.3 × 53.3 × 13.9 cm). It weighs 28 lb (12.7 kg) when operating.
What size pipe does it need?
Everpure says to use a 3/4 inch water line. The inlet is 3/4 inch MNPT and the outlet is 3/4 inch FNPT.
How often should the cartridges be changed?
Everpure sets a six-month preventative maintenance programme, and says to change them when capacity is reached or pressure falls below 10 psi. We set the schedule for your site.
What are the part numbers?
EV9325-03 is the system and EV9612-32 is the replacement i4000² cartridge.
Does the datasheet give ice output in pounds a day?
No. The Triple's sheet says it is for higher volume, higher flow, higher capacity ice machines. We size it from your machine's data at survey.
Do you supply, fit and change it?
Yes. We supply the system, fit it and change the cartridges under a maintenance plan. The survey is chargeable and is credited back if you go ahead.
Related products
Figures come from the manufacturer datasheet (PDF). Reviewed November 2026.
Supplied, installed and serviced across the UK
Across most of southern and eastern England, mains water is very hard. Rain filtering through chalk and limestone dissolves calcium and magnesium, and that scale coats heating elements, so we size every system to your supply and your equipment.
Tell us about your site and what you need the water for. We specify the system, fit it and keep it running under Comprehensive Maintenance.
Source: Drinking Water Inspectorate, Drinking Water Quality in England triennial report (2020–2022).
Interested in the Everpure Insurice Triple-i4000² System?
Tell us your setup and we'll specify, supply, install and service the right configuration for your site.
Are you an AI agent? See this page as Markdown
