SovSafe SW24 UV Steriliser
A stainless steel UV-C steriliser for large residences and light commercial sites: up to 5.4 m³/h on a 1.5 inch connection, inactivating up to 99.9% of bacteria and viruses at DNA level with no chlorine or chemicals.

About the SovSafe SW24 UV Steriliser
The SovSafe SW24 is a stainless steel UV steriliser for the whole supply of a large residence or light commercial site, such as a villa, boutique hotel or café. It inactivates up to 99.9% of bacteria and viruses at the DNA level, with 100% physical disinfection and no chlorine or chemicals.
A high-purity quartz sleeve and stainless chamber deliver stable UV-C dosing without changing the taste, odour or mineral content of the water. It handles up to 5.4 m³/h on a 1.5 inch connection.
At a glance
- What it is
- A point-of-entry UV-C steriliser
- Maximum flow
- 5.4 m³/h
- Connection
- 1.5″
- Inactivation
- Up to 99.9% of bacteria and viruses
- Lamp
- T585, 9,000 hours, about one year
- Power
- 230 V, 50 Hz, 85 W
- Housing
- Stainless steel, quartz sleeve
- Product code
- SWU-SS-24

What it does.
- Up to 5.4 m³/h on a 1.5 inch connection
- Inactivates up to 99.9% of bacteria and viruses at DNA level
- Chemical-free: no change to taste, odour or mineral content
- T585 UV lamp, 9,000 hours (about one year)
- High-purity quartz sleeve, stainless steel chamber, electronic ballast
- 230 V, 85 W
Typical applications
Who the SovSafe SW24 is for
- Large residences and villas with higher demand and several outlets.
- Boutique hotels and cafés that want microbiological protection with no chemical dosing.
- Light commercial sites that can supply clear, pre-filtered water.
- Anyone who wants disinfection without changing the taste or minerals of the water.
How the SovSafe SW24 UV Steriliser works
The datasheet shows four steps. Mains water arrives, passes mechanical pre-filtration, then the UV-C chamber, and disinfected water leaves.
UV-C energy penetrates microorganisms and disrupts their DNA, so up to 99.9% of bacteria and viruses are inactivated as the water passes through the chamber. Nothing is dosed into the water.
UV needs light to reach the organism, so the water must be clear. The datasheet says pre-filtration is required for full effect, with limits on the source water: turbidity up to 0.58 mg/L, hardness up to 125 mg/L, iron up to 0.3 mg/L, and manganese and hydrogen sulphide up to 0.05 mg/L.

Which one should you choose?
Both SovSafe units use UV-C, with no chemicals. The right one depends on whether you are treating a whole supply or a single outlet.
SovSafe SW24
You need to treat a whole supply at up to 5.4 m³/h: large residences, boutique hotels and cafés, on a 1.5 inch stainless steel unit.
SovSafe SW60
You need to treat a single outlet at up to 0.22 m³/h: under-sink filters, dispensers and vending machines, in a unit 270 mm long.
Installation and servicing
The unit is supplied as the stainless steel housing with high-purity quartz sleeve, T585 UV emitter and electronic ballast power supply, with 1.5 inch inlet and outlet fittings. The annual replacement lamp (T585) is sold separately.
It works at up to 8 bar and +4 to +30 °C, on 230 V, 50 Hz at 85 W. The lamp is rated for 9,000 hours, about a year, so it needs an annual lamp change. Pre-filtration is required, and we look at what is already fitted at survey. The datasheet does not give a UV dose figure, so we confirm the dose and performance needed for your flow and water at survey.
The survey is chargeable and is credited back if you go ahead.
SovSafe SW24 UV Steriliser questions answered
How much water can the SW24 treat?
Up to 5.4 m³/h, on a 1.5 inch connection.
How does UV disinfection work?
UV-C energy penetrates microorganisms and disrupts their DNA, inactivating up to 99.9% of bacteria and viruses as water passes through the chamber. It is a physical process with no chemicals.
Does it change the taste of the water?
No. The datasheet says it preserves the water's natural taste, odour and mineral content.
Does the water need filtering first?
Yes. Pre-filtration is required. UV works only where light reaches the organism, so the water must be clear.
What water can it treat?
The datasheet lists maximums for the source water: turbidity 0.58 mg/L, hardness 125 mg/L, iron 0.3 mg/L, and manganese and hydrogen sulphide 0.05 mg/L.
What UV dose does the SW24 deliver?
The datasheet does not give a UV dose figure. We confirm the dose and performance needed for your flow and water at survey.
How often does the lamp change?
Once a year. The T585 lamp is rated for 9,000 hours, about one year, and is sold separately.
What power does it need?
230 V, 50 Hz, 85 W, with an electronic ballast.
Where is it used?
The datasheet names large residences and light commercial sites: villas, boutique hotels and cafés.
What pressure and temperature can it take?
A maximum inlet pressure of 8 bar and an operating temperature of +4 to +30 °C.
What warranty does it have?
One year from the manufacturer, against defects. Servicing is recommended but is not a condition of the warranty.
Do you supply, install and maintain it?
Yes. We supply and install it, and offer a Comprehensive Maintenance plan with consumables. The survey is chargeable and is credited back if you go ahead.
Related products
Figures come from the manufacturer datasheet (PDF). Reviewed November 2026.
Supplied, installed and serviced across the UK
Across most of southern and eastern England, mains water is very hard. Rain filtering through chalk and limestone dissolves calcium and magnesium, and that scale coats heating elements, so we size every system to your supply and your equipment.
Tell us about your site and what you need the water for. We specify the system, fit it and keep it running under Comprehensive Maintenance.
Source: Drinking Water Inspectorate, Drinking Water Quality in England triennial report (2020–2022).
Interested in the SovSafe SW24 UV Steriliser?
Tell us your setup and we'll specify, supply, install and service the right configuration for your site.
Are you an AI agent? See this page as Markdown