Cold water for a whole site.
Monarch water stations are floor-standing stainless units built for the places a countertop cooler gives up: canteens at the lunch rush, factory floors in high summer, schools between sessions. Six taps, tanks measured in hundreds of litres, and compressor cooling that refills as fast as people empty it.
Three models, from the chilled-only F6 to the CB60 that pours genuine boiling water. All of them specified against your site's water, installed and serviced by our own engineers across the UK.
Built for the rush, not the rest of the day.
Built for volume
Six taps and tanks measured in hundreds of litres. One station keeps a full site in cold water through the busiest part of the day, without a queue forming.
Stainless throughout
SS304 inner tanks and stainless bodies, specified for hard use in canteens, factories and sheltered outdoor areas where a plastic cooler would not last.
Cold, hot or boiling
Chilled at 5-10 °C on every model, hot at 90 °C and above on the CB35 and F6, and genuine boiling water at 60 L/h on the CB60.
Compressor cooling
Danfoss and hermetic compressors running R134a, sized to recover the tank quickly rather than trickling cold water out of a small reservoir.
Filtration included
A three-stage pre-filtration set ships with the station and is replaced on plan, so the water tastes the same in month twelve as it did on day one.
Installed and serviced
Specified against your site's water, commissioned by our own engineers, and kept running on a maintenance plan with the warranty intact.
Find the right station.
Monarch CB35 Water Station
The workhorse of the range. A 200 litre cold tank and Danfoss compressor cooling keep 300 litres an hour of chilled water coming, with 80 litres an hour of hot alongside it, from six taps on one stainless station.
Touch-panel control with a digital temperature display.
- Up to 300 L/h of chilled water at 5-10 °C from a 200 L cold tank
- 80 L/h of hot water from a 27 L hot tank
- Six faucets: four chilled, two hot
- Danfoss R134a compressor cooling
- SS304 inner tank with an SS201 stainless body
- Three-stage pre-filtration, commissioning and a 1-year warranty included
CB35 specification · CB35T · Touch
| Model | CB35T |
|---|---|
| Control | Touch panel with digital display |
| Chilled supply | 300 L/h at 5-10 °C |
| Hot supply | 80 L/h |
| Tanks | 200 L cold · 27 L hot |
| Faucets | 6 (4 cold, 2 hot) |
| Cooling | Danfoss compressor · R134a |
| Capacity | 180 to 200 people |
| Power | 500 W · 220-240 V |
| Build | SS304 tank · SS201 body |
| Dimensions (W × D × H) | 1600 × 450 × 1520 mm |
| Warranty | 1 year |
Pick by the site, not the spec sheet.
Factories & labour accommodation
Hundreds of people, one break window, and no tolerance for running out. The F6 chilled-only build exists for exactly this.
Schools, universities & mosques
Heavy peaks between sessions and a build that has to survive constant use. Six taps clear a crowd fast.
Hotels & commercial catering
Boiling water on tap for service alongside chilled, with a stainless finish that suits a back-of-house kitchen.
Not sure which fits? Tell us how many people you serve and when the peak falls, and we will size it for you. If the site needs a bottle-fill point rather than a tap run, the Crown Spring hydration station covers that instead.
Tell us the headcount, we will size the station.
Send us your site, your peak demand and whether you need hot or boiling alongside chilled. We will specify the model, the pre-filtration and the maintenance plan to match.